EU Standard · Single-phase
8.5 kW / 8.5 kVA single-phase hybrid inverter: 2 MPPT (5 kWp each), 500 V DC input, 17 kVA surge for 5 s, 180 A battery discharge, dual AC outputs and 94% peak efficiency.
The DG-8.5K-SP-EU is the 8.5 kW step of our single-phase platform: two independent MPPT trackers, up to 500 V DC input and 18 A per tracker, with two configurable AC outputs that keep a protected circuit live while the rest of the house runs on grid or PV.
Peak efficiency is 94% and the unit rides through 17 kVA for short bursts, which covers pump and compressor starts without tripping. Discharge current is 180 A on the 48 V bus, so a 20 kWh bank can be emptied at full load.
Sizing rule: one 8.5 kW unit for a 10–12 kWp array on an east–west roof, two arrays that never see the same irradiance at once, or a single-phase house with a heat pump.
| Model | DG-8.5K-SP-EU |
|---|---|
| Grid Standard | EU — 230 Vac, 50/60 Hz |
| Phase | Single-phase |
| Rated AC Output Power | 8.5 kW |
| Max AC Output Power | 8.5 kVA |
| Peak Power (5 s) | 17 kVA |
| Rated Output Voltage | 220 / 230 / 240 Vac |
| Rated Output Frequency | 50/60 Hz (auto sensing) |
| Power Factor | 0.6–1 (inductive or capacitive) |
| AC Connection | L + N + PE |
| Max DC Input Power | 10 kWp (2 × 5 kWp) |
| Max DC Input Voltage | 500 V |
| PV Input Voltage Range | 60–500 V |
| MPPT Voltage Range | 60–500 V |
| MPPT Channels | 2 |
| Max MPPT Input Current | 18 A + 18 A |
| Max PV Charging Current | 140 A |
| AC Input Range | 170–280 Vac (PC) / 90–280 Vac (home appliances) |
| Max AC Charge Current | 120 A |
| Max Efficiency | 94% (peak) |
| Rated Battery Voltage | 48 Vdc |
| Battery Type | Lead-acid / Lithium |
| Max Charge / Discharge Current | 180 A discharge |
| Charge Voltage Range | 54 Vdc float / 63 Vdc overcharge |
| Grid Overload Protection | 5 s @ ≥140% load; 10 s @ 110%–140% load |
| Transfer Time | 10 ms (PC) / 20 ms (home appliances) |
| Parallel Capability | Yes |
| Dimensions (W × D × H) | 540 × 403 × 122 mm |
| Weight | 14.5 kg |
| Operating Temperature | −10 to +55 °C |
| Storage Temperature | −15 to +60 °C |
| Humidity Range | 5%–95% (non-condensing) |
| Cooling Method | Forced air cooling |
| Protection Class | IP21 |
| Communication Ports | RS232 / RS485 / dry contact (WiFi optional) |
| Dry Contact Control | Yes |
Values are typical at 25°C unless otherwise stated. Full test report available on request.
Send the details below and you will get price, lead time and shipping cost in one reply — usually within one business day.
Prefer to talk? Message us on WhatsApp — +86 180 9640 4273
Send us your load profile, site location and target quantity — we reply within one business day.